High voltage motor rotor stamping

SINGLE SLOT NOTCHING

At present, the outer diameter of the largest punching sheet we produce is as high as 1250mm, which is currently the largest width of silicon steel coil. In order to offset the tooth harmonics during the operation of the motor, the slots of the Stator Core or Rotor Core are often designed to be skewed, rotary notching is very suitable for the production of this type of Motor Lamination, which is quite useful for the designs of large size motors.    

WORKING PRINCIPLE

Usually, there are not too many types of slots on the stator or Rotor Lamination, and each slot needs a specific tool to stamp. Even so, the overall cost of the tool is very low. The production time of the mold is only one to two days.

In the process of Single Notching, the tool only cuts one slot on the round sheet at one time, which means that the total number of cuts is equal to the number of slots on the lamination. All of our CNC single notching press have a high precision positioning system and indexer. Single notching is one of our main competencies, it's quite a good and economical choice for medium & large size motor lamination production.

APPLICATION & COST

More than half of our CNC presses are equipped with automated production systems. These devices can greatly reduce production costs while ensuring production speed. Single notching is very suitable for low-to-medium volume production or prototype development, the tool cost of it is quite low, it's production speed is relatively slow, and the time to produce a lamination varies from a few seconds to tens of seconds.

According to the principle and characteristics of the magnetic field, the magnet and the magnet exert force and torque on each other through the magnetic field generated by each other, simply understand that the synchronous motor is the result of the action of the stator magnetic field and the rotor magnetic field.